Sound
Note:
If an Equaliser preset (POP, ROCK,
CLASSIC) is selected, the manual in-
crease of the bass level does not result
in an audible change starting at a cer-
tain setting. For further information,
please read the note in the section
entitled "Equaliser presets".
Adjusting the middle
You can select 1 of 4 centre frequencies
(500 Hz, 1 kHz, 2 kHz, 3 kHz). In addition,
you can adjust the level between -7 and +7
for the selected centre frequency.
Adjusting centre frequency and level
u
Press the AUD button >.
"BASS" appears on the display.
u
Press the
or
until "MIDDLE" appears on the display.
u
button 4 once to reach
Press the
the MIDDLE submenu.
u
or button 4 repeatedly
Press the
until the desired centre frequency ap-
pears on the display.
u
Press the
or
the level between -7 and +7.
u
Press the AUD > button twice to exit
the menu.
26
button 4 repeatedly
button 4 to adjust
Adjusting the treble
You can select 1 of 4 treble frequencies
(10 kHz, 12 kHz, 15 kHz, 17 kHz). In ad-
dition, you can adjust the level between
-7 and +7 for the selected treble frequency.
Adjusting treble frequency and level
u
Press the AUD button >.
"BASS" appears on the display.
u
Press the
or
until "TREBLE" appears on the display.
button 4 once to reach
u
Press the
the TREBLE submenu.
u
or button 4 repeatedly
Press the
until the desired treble frequency ap-
pears on the display.
u
Press the
or
the level between -7 and +7.
u
Press the AUD > button twice to exit
the menu.
Note:
If an Equaliser preset (POP, ROCK,
CLASSIC) is selected, the manual in-
crease of the treble level does not re-
sult in an audible change starting at a
certain setting. For further informa-
tion, please read the note in the section
entitled "Equaliser presets".
button 4 repeatedly
button 4 to adjust