Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Equalizer presettings
Equalizer presettings
(Presets)
This device features an equaliser in which
the settings for the music genres "ROCK",
"POP" and "CLASSIC" are already pro-
grammed.
To select an equaliser setting,
u
press the AUD button >.
"BASS" appears on the display.
u
Press the
or
until "POP", "ROCK", "CLASSIC" or "EQ
OFF" appears on the display.
u
Press the
or
one of the settings or select "EQ OFF"
to switch off the equalizer.
When you have fi nished making your
changes,
u
press the AUD button >.
Note:
Without Equaliser presets, you can ad-
just the bass and treble up to +7.
If you selected an Equaliser preset
(POP, ROCK, CLASSIC), the adjust-
ment of bass and treble is only limited.
For example, the preset POP only al-
lows for an audible treble adjustment
up to +3.
28
button 4 repeatedly
button 4 to select
Adjusting the display
settings
Adjusting the display brightness
If your car sound system is installed as de-
scribed in the installation instructions and
your vehicle features the corresponding
connection, the display brightness for day
and night is switched by switching on the
vehicle lighting. The display brightness can
be adjusted separately for day and night in
increments from 1 - 9.
Press the MENU•OK button 5.
u
u
Press the
or
until "DIM DAY" or "DIM NIGHT" appears
on the display.
u
button 4 to open the
Press the
menu.
u
Press the
or
between the brightness levels.
When you have fi nished making your
changes,
u
press the ESCAPE button <.
Setting the display illumination
colour
For the display illumination, you can mix a
colour from the RGB spectrum (red green
blue) or select a colour during a colour
seek.
Mixing a colour for the display
illumination
To customise the display illumination to suit
your tastes you can mix a colour yourself
using the three primary colours red, green
and blue.
Display
button 4 repeatedly
button 4 to switch
Publicidad
Capítulos
Tabla de contenido
