Vecta Mounts; V-Mount - Monitor Audio VECTA V240 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35

Vecta Mounts

NOTE: All mounts are sold seperately. Choose the correct mount for your fixing configuration.
WARNING: Please ensure you are confident in providing a safe and secure fixing. Please
use appropriate fixings for the type of wall construction as no wall fixings are supplied.

V-MOUNT

The V-MOUNT is the mount used when fixing the loudspeaker square on to the wall either horizontally or
vertically. This is held in place using upto 4 fixing points - fixings not supplied. There is a cable through
hole to feed the cable through and into the terminals. Remove the insulation from the cable and clamp the
cable in place using the push down terminals.
Loudspeaker Fixing Bolt.
Secured from below, this
fixes the loudspeaker to
the bracket.
Wall Fixing Points
Use appropriate fixings
and screws for the wall it is
being fixed to. (4 in total)
Bracket Cover.
When secured to the
wall, slide this over the
loudspeaker mounting
pole and press into place
to hide cables and wall
fixings.
Loudspeaker Mounting Arm.
This is the arm the
loudspeaker will sit on.
2
Loudspeaker Terminals.
Push down on the terminals
to clamp the cable in place.
Vecta Installation Guide
Cable Through Hole.
Feed cable through and
feed around into terminals.
Wall Fixing Points
Use appropriate fixings
and screws for the wall it is
being fixed to. (4 in total)
Used to set the angle of
the loudspeaker and also
help grip it in place.
Teeth

Publicidad

Tabla de contenido
loading

Tabla de contenido