Angled Wedge - Monitor Audio VECTA V240 Manual De Instrucciones

Angled Wedge

The wedge has a 32.5 degree angle to it and is used in conjunction with the V-MOUNT to angle the
loudspeaker off the wall when corner mounting (using the V-CORNER) or square to the wall is not suitable.
The combination of the wedge and angular adjustment of the speaker will allow up to 45 degrees of
adjustment. Like the V-MOUNT it can be used in both horizontal and vertical configurations.
Fixings are not supplied to secure the wedge to the wall. Only to secure the V-MOUNT to the wedge.
Bracket Cover
NOTE: When adjusting the angle of the loudspeaker, always loosen the fixing bolt and lift
the loudspeaker off the teeth so as not to damage them.
Angled Wedge Screws.
Used to attach the
V-MOUNT to the wedge.
These are supplied.
monitoraudio.com
V-MOUNT.
loudspeaker towards the
listening position when
fitting it square to the wall
isn't desired. Attach this to
the wall using appropriate
fixings and then fix the
V-MOUNT to the wedge
using the supplied screws.
Angled Wedge.
Used to angle the
3