Storing The Pressure Washer - Black Max BM80721 Manual Del Operador

STORING THE PRESSURE WASHER

See Figure 19.
NOTE: Regular use of pump protector will give you better
performance of the unit and increase the life of the pump.
See the Replacement Parts List for available sizes and
part numbers of these items and call customer service
at 1-800-726-5760 to order.
Store in a dry, covered area where the weather can't damage it.
It is important to store this product in a frost-free area. Always
empty water from all hoses, the pump, and the detergent
bucket before storing.
 Make sure the on/off switch is in the OFF position.
 Disconnect the water connection.
 Tilt the unit as shown to allow any remaining water in the
pump to drain from the water inlet.
MAINTENANCE
NOTICE:
The use of a pump protector is strongly encouraged to
prevent cold weather damage during storage over the
winter months.
 Coil the hose and place in the hook-and-loop strap on the
unit's handle. Do not allow the hose to become kinked.
 Store the unit and accessories in an area that does not
reach freezing temperatures. Do not store near furnace or
other sources of heat that could dry out the pump seals.
Page 15 — English