Descargar Imprimir esta página

Storing; Storing The Charger; Cleaning; Cleaning The Charger - Stihl AL Serie Manual De Instrucciones

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
English
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.

7 Storing

7.1

Storing the Charger

► Unplug the mains plug from the socket.
► Remove the battery.
1
► Roll up the connecting cord and attach it to the charger.
► The charger should be stored in such a way that the
following conditions are met:
– The charger is out of the reach of children.
– The charger is clean and dry.
– The charger is in an enclosed room.
– The charger is separate from the battery.
– The charger is not hung up by the connecting cord.
– The charger is stored at temperatures between + 5 °C
and + 40 °C.

8 Cleaning

8.1

Cleaning the Charger

► Disconnect the plug from the wall outlet.
► Clean the charger with a damp cloth.
18
2
► Clean the charger's electrical contacts with a soft brush.

9 Maintenance and Repairs

9.1

Servicing and Repairing the Charger

The charger requires no servicing and cannot be repaired.
► If the charger has a malfunction or is damaged: Replace
the charger.
► If the connecting cable has a malfunction or is damaged:
Do not use the charger and have connecting cable
replaced by a STIHL servicing dealer.

10 Troubleshooting

10.1 Troubleshooting Charger

If the battery is not being charged and the LED on the
charger flashes red: There is no contact between the
charger and battery.
► Remove the battery.
► Clean contacts on charger.
► Fit the battery.
► If the battery is still not being charged and the LED on the
charger flashes red: Do not use the charger and contact
your STIHL servicing dealer.
Malfunction in charger.

11 Specifications

11.1 STIHL AL 101, AL 300, AL 500 Chargers

– Rated voltage: see rating label
– Frequency: see rating label
– Rated power: see rating label
– Charging current: see rating label
7 Storing
0458-511-9921-C

Publicidad

loading

Este manual también es adecuado para:

Al 101Al 300Al 500