both sides (fig. a).
Lean and fit-in the car seat into the seat of the
stroller (fig. b).
1 8
First lock the strap buttonhole into the button of
•
the stroller (arrow 1), then pass through the strap
behind the handlebar of the car seat (arrow 2).
Lock the strap buttonhole into the button on the
lower part of the stroller frame (arrow 3) and then
tighten the strap until the car seat is completely
fastened into the stroller (arrow 4).
Follow the same procedures on the other side of
the stroller (fig. c).
Car seat locked correctly into the stroller (fig. d).
Releasing the car seat from the stroller:
loosen the belts;
unlock the strap buttonhole from the lower part of
the stroller frame;
slip it off from behind the handlebar of the car seat;
then, unlock the strap buttonhole from the stroller
button.
SERIAL NUMBERS
1 9
The Stroller Si has all the following relevant
•
information behind the backrest: product name,
date of manufacture and serial number.
This information is required for any complaints.
ACCESSORIES
2 0• Changing BAG: bag with pad for changing the baby.
Can be attached to the stroller.
PARASOL: Practical matching parasol.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil.
CLEANING THE RAIN CANOPY: wash with a sponge and
soapy water; do not use detergents.
CLEANING FABRIC PARTS: brush fabric parts to remove
dust and wash by hand at a maximum temperature of
30°C; do not wring; do not use chlorine bleach, do not
iron; do not dry clean; do not apply solvent-based stain
removers and do not dry in a tumble dryer.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001
certified company. This certification is
a guarantee for customers and
consumers of the transparency and
SI_EU_FI000904I101.indd 14
trustworthiness of the company's procedures and
working methods. Peg Pérego can make changes at
any time to the models described in this publication
for technical or commercial reasons. Peg Pérego is at
the disposal of its customers and consumers to ensure
that all their demands and queries are fully satisfied. It
is a key part of our policy to ensure we are always
aware of our customers' views and requirements. We
would therefore be very grateful if, after using a Peg
Pérego product, you take the time to fill in our
CUSTOMER SATISFACTION QUESTIONNAIRE, making a
note of any comments or suggestions you might have.
You can find the questionnaire on the Peg Pérego
website: www.pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of the item get lost or damaged, only
use genuine Peg Pérego spare parts. For any repairs,
replacements, information on the products and sales
of genuine spare parts and accessories, contact the
Peg Pérego Assistance Service and state the serial
number of the product, if present.
tel. 0039/039/60.88.213
fax 0039/039/33.09.992
e-mail assistenza@pegperego.it
website www.pegperego.com
- 14 -
16-07-2009 8:57:47