Finishing lamination
1. Press and hold POWER button for one second and "COOL"
symbol appears on the LCD.
2. After the roller cool down (below 65°C), the laminator will beep
and power will be stopped automatically.
3. Press the power switch on the back of the laminator to turn the
machine off.
m
CAUTION: Cooling down the machine before turning off the
power switch protects and extends the life of the rollers.
NOTE: For added safety and environmental reasons the laminator
will automatically go into sleep mode after 120 minutes of inactivity.
If you wish to use the laminator again, press the POWER button for 1
second to turn on the machine.
Lamination Guide
Material
Film thickness
Copy Paper
75 ~ 100 Micron
125 ~ 150 Micron
175 ~ 250 Micron
300 ~ 350 Micron
Brochure Paper
75 ~ 100 Micron
125 ~ 150 Micron
175 ~ 250 Micron
300 ~ 350 Micron
Photo Paper
75 ~ 100 Micron
125 ~ 150 Micron
175 ~ 250 Micron
NOTE: For "STAND BY" mode, please keep the temperature at 70°C and speed 2.
Guarantee
Operation of this machine is guaranteed for 1 year from date of
purchase, subject to normal use. Within the guarantee period, ACCO
Brands Europe will at its own discretion either repair or replace the
defective machine free of charge. Defects due to misuse or use for
inappropriate purposes are not covered under the guarantee. Proof
of date of purchase will be required. Repairs or alterations made
by persons not authorised by ACCO Brands Europe will invalidate
the guarantee. It is our aim to ensure that our products perform to
the specifications stated. This guarantee does not affect the legal
rights which consumers have under applicable national legislation
governing the sale of goods.
Register this product online at www.accobrands.com
Laminating Tips
• DO NOT LAMINATE AN EMPTY POUCH.
• Never insert the loose end of the pouch into the machine first. This
could cause the machine to jam.
• Before laminating important or unique documents, always run a
test pouch through the laminator using a similar type of document.
• As soon as hot lamination is completed, remove the lamination
from the front of the machine and place on a cool flat surface for
cooling to prevent the pouch from curling.
• Do not cut pouches prior to lamination.
Setting without Carrier
Temperature
Speed
100°C
6
120°C
4
120°C
3
130°C
2
100°C
5
120°C
3
130°C
2
140°C
2
100°C
4
130°C
3
140°C
2
If you experience a technical fault with your product during the
warranty period, please contact the relevant ACCO service centre.
Depending on the diagnostics and the model type, we will either
arrange a service call by an engineer or we will ask you to return
the machine to ACCO. If you return the machine, ACCO will, at its
discretion, in accordance with law, either (i) repair the machine using
either new or refurbished parts, or (ii) replace the machine with a
new or refurbished machine that is equivalent to the machine being
replaced.
G
Setting with Carrier
Temperature
Speed
130°C
4
130°C
3
140°C
2
-
-
130°C
4
140°C
3
140°C
2
-
-
130°C
3
140°C
2
140°C
1
7