Scope Of Delivery; Instructions For Use - MESTO RESISTENT EXTRA Serie Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
Never spray on people, animals, electrical devices and lines, into the wind, or into
bodies of water.
Repairs and modifications to the tank are not permitted.
The effect of the safety valve must not be bypassed or made inoperative.
Avoid ignition sources in the environment if you spray combustible liquids.
Contact between spraying device materials and hydrogen peroxide or other agents
that give off oxygen may result in increased pressure similar in nature to an
explosion. Never place such agents in the device.
Have damaged parts or parts that do not work properly repaired immediately by our
customer service department or by service partners authorized by us.
Do not allow the device to remain under pressure and/or exposed directly to
sunlight. Make certain the device is not heated beyond the maximum operating
temperature. ( Table 1 below).
Never blow through the nozzles or valves with your mouth.
Use only MESTO spare and accessory parts.
We cannot assume any liability resulting from the use of third-party parts.
Wear suitable protective equipment when working with hazardous substances.
When pumping, always observe the pressure gauge to ensure the maximum
spraying pressure is not exceeded (
Before filling, after use and before maintenance work, allow the residual pressure in
the tank to dissipate completely (

Scope of delivery

Tank [1] with pump [2], pressure hose [3] with shut-off valve [4], carrying strap [5], spray
lance with nozzle [6], instructions for use [7] (Figs. 1a and 1b)
You will find the illustrations referred to above in the front fold-out pages 3 – 5 of these

Instructions for Use.

Technical data
Device family
Type
Max. filling amount
Total contents
Max. spraying pressure
Max. operating temperature
Weight when empty
Material of tank
Where device is carried
Technical residual quantity
Max. volume flow
Recoil force
Table 1
Table 1 below).
Section "After Use", Section 1).
RESISTENT EXTRA
3592
3602
Shoulder
Back
13
RESISTENT EXTRA PLUS
3592P
5 l
approx. 8,75 l
6 bar (87 psi)
50 ° C (130.00 ° F)
approx. 4 kg
Stainless steel 18/9
Shoulder
0.03 l
0.78 l/min
< 5 N
3602P
Back

Publicidad

Tabla de contenido
loading

Tabla de contenido