Purpose Of This Manual; Safety Information - Battipav MAGIK Manual De Instrucciones

Battipav srl
"TRANSLATION OF THE ORIGINAL LANGUAGE"

PURPOSE OF THIS MANUAL

This manual is an integral part of the machine.
It was produced by BATTIPAV S.R.L. to provide
those authorised to work with the machine with the
information required for its foreseeable lifespan.
Before starting to use this machine read the safety
chapter carefully.
Each machine is subjected to a series of tests and
carefully checked before leaving our factory.
BATTIPAV S.R.L. is constantly striving to develop
their machines and therefore reserves the right to
make any change without prior notice. Therefore, no
claims may be made on the basis of the data and
illustrations contained in this manual.

SAFETY INFORMATION

• The manufacturer accepts no responsibility where
the MAGIK cutter is used with any tools other
than those specified in the "RECOMMENDED
USE" paragraph.
DO NOT USE WOODEN DISCS.
DO NOT USE DRY-CUTTING DISCS.
• MAGIK is made to operate exclusively under the
conditions indicated under "TYPE OF OPERATION
ALLOWED", in the "TECHNICAL DATA" paragraph.
• During cutting
the machine
• MAGIK is
with a
CAUTION
DO NOT USE DIAMOND TIPPED DISCS OF LOW
QUALITY OR THAT ARE NOT SUITABLE FOR THE
SPECIFIC USE FOR WHICH THE MANUFACTURER
SUPPLIED THEM. THE USE OF POOR QUALITY
DISCS CAN HARM THE OPERATOR AND DAMAGE
THE MACHINE, AS WELL AS SIGNIFICANTLY
SLOWING THE WORK.
operations,
to rest as indicated.
not made for
continuous
CAUTION
ALWAYS TEST THE ROTATION DIRECTION WITH
THE CUTTING DISC REMOVED.
CAUTION
ALWAYS USE INDIVIDUAL PROTECTION DEVICES
TO REDUCE THE RISKS CAUSED BY WORK. NEVER
START THE MACHINE WHEN THE CUTTING TOOL
IS MOVING; WAIT FOR IT TO STOP.
Warning! When using electric tools, following
safety precautions should always be followed to
reduce the risk of fire, electric shock and personal
injuries. Read and follow all these instructions
before attempting to operate this product and save
them with care!
SAVE THESE INSTRUCTIONS WITH CARE
Keep your work area perfectly clean
• Cluttered areas invite injuries.
Consider work area environment
• Don't expose tools to rain.
• Don't use tools in damp or wet locations. Keep
work area well lit.
• Don't use tools in presence of flammable liquids
or gases.
Guard against electric shocks
• Prevent body contact with grounded surfaces.
Keep children away!
• Do not let third parties contact tool or extension
allow
cord. All visitors should be kept away from work
area.
use
load.
Store your tools in a save place
• When not in use, tools should be stored in dry and
save places, out of the reach of children.
Don't force tool
• It will function better and in a safer way at the rate
for which it was intended.
Use the right tool
• Don't use low duty tools or accessories to do
the job of a heavy-duty tools. Don't use tools for
purposes not intended.
GB
15