Denver ORUS Instrucciones De Uso página 11

ON/OFF: Press the power button once, the LCD starts for
working, press power button twice, the background screen light is on.
If there is headlight on e-bike, when the screen background light is on,
then
the headlight is on (see Fig. 5.1), when the background light is off,
the headlight is off. (This headlight control is not default setting)
(Fig 5.1)
If you want to switch off, press power button for 3 seconds, then the LCD background light is off.
Usually when the e-bike stayed more than 5 minutes, the display will automatically shut down.
1) CURRENT SHOW (see Fig.5.2):
It shows the current controller of the discharge current, each grid shows for 2A, 6
grids show 12A or more.
(Fig5.2)
2) RIDING MODE SELECTION(Fig.5.3) :
Three modes: POWER, NORMAL AND ECO. The arrow
Near the mode shows the selection. NORMAL is the default
setting.
POWER: under the assistance mode, the e-bike max speed is
top speed.
NORMAL: under the assistance mode, the e-bike Max speed
(Fig.5.3)
is 64% of top speed.
ECO: under the assistance mode, the e-bike Max speed is 58% of top speed.
3) REAL-TIME SPEED:
Display shows the real-time riding speed, the Kilometer and
Mile can be selected by SET 4
(Fig 5.4)
4) 6KM/H:
Long press the key " - " 2 seconds then the 6KM/H function start,
the icon will be displayed on the screen.
(Fig 5.5)
5) PAS LEVEL SELECTION:
Press " + "or " - " to change the assistance level, 1 level is the
default setting. It means even though you don't pedal the bike
forward, the bike can start moving directly at max speed of
6KM/H only, provided this button is kept pressing. As soon as
(Fig 5.6)
this button is released, the bike will stop immediately.
10/17