Functional Description; Intended Use; Noise/Vibration Information - Bosch PST Serie Instrucciones De Servicio

OBJ_BUCH-2 609 932 333-002.book Seite 2 Mittwoch, 29. September 2004 10:23 10
f) Keep cutting tools sharp and clean.
g) Use the power tool, accessories and tool
bits etc., in accordance with these instruc-
tions and in the manner intended for the
particular type of power tool, taking into
account the working conditions and the
work to be performed.
5) Service
a) Have your power tool serviced by a quali-
fied repair person using only identical
replacement parts.
Machine-specific
Safety Notes
B Never use the machine with a damaged cable.
Do not touch the damaged cable and pull the
mains plug when the cable is damaged while
working.
B Connect machines that are used in the open
via a residual current device (RCD).
B Do not work materials containing asbestos.
B Use suitable detectors to determine if utility
lines are hidden in the work area or call the
local utility company for assistance.
B Secure the workpiece.
B Use only sharp, flawless saw blades.
B Apply the machine to the workpiece only
when switched on.
B Keep hands away from the sawing range. Do
not reach under the workpiece.
2 609 932 333 • 29.9.04
B Pay attention that the base plate 6 rests
securely on the material while sawing.
B When the cut is completed, switch off the
machine and then pull the saw blade out of
the cut only after it has come to a standstill.
B Do not brake the saw blade to a stop by apply-
ing side pressure after switching off.
B Always wait until the machine has come to a
complete stop before placing it down.

Functional Description

Read all instructions.

Intended Use

Noise/Vibration Information

Wear hearing protection!
English–2