RK Rose+Krieger LZ 60 S Instrucciones De Montaje página 35

Sources for the harmonised standards according to article 7, paragraph 2:
EN ISO 12100:2010-11
EN 61000-3-3:2008
EN 55014-2/A2:2008:
EN 61000-3-2:2006
EN 55014-1:2006-12
The manufacturer or the person authorised are obliged to hand over the special documents for
the partially completed machine to the national authorities on reasoned request. This
transmission is carried out electronically.
The commercial protective rights remain unaffected by this!
Important note! The partially completed machine must not be put into operation, until, if
required, it has been determined that the machine in which the partially completed machine is to
be installed complies with the regulations of this guideline.
Minden / 29/07/2014
Location / Date
Minden / 29/07/2014
Location / Date
Safety of machinery – General principles for design – Risk assessment and
risk reduction (ISO 12100:2010)
Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current <= 16 A per phase,
which are not subject to conditional connection (IEC61000-3-3_2008).
Electromagnetic compatibility – Requirements for household appliances,
electric tools and similar apparatus – Part 2: Immunity, product family
standard
Electromagnetic compatibility (EMC) – Part 3.2: Limits for harmonic
current emissions (Equipment input current <= 16 A per phase)
Electromagnetic compatibility – Requirements for household appliances,
electric tools and similar apparatus – Part 1: Emission
Signature
Signature
1. Installation declaration
Technical Manager
Signatory's position
CEO
Signatory's position
35