Serial Numbers; Cleaning And Maintenance; Peg-Pérego After-Sales Service - Peg-Perego carrello book plus Instrucciones De Uso

to the two grey buttons on the top of the lower rear bar.
Please note that the eyelets open (fig_f).
WARNING! If this operation is not performed correctly,
the basket will not properly hold the weight.
Attach the basket tabs to the grey buttons on the front of
the frame (figure).
REFER TO OUR INSTALLATION INSTRUCTIONS VIDEO AT:
WWW.PEGPEREGO.COM
6 FIXED OR SWIVELING FRONT WHEELS BOOK PLUS:
Lift the levers to prevent the wheels from swiveling
(fig_a) and lower them to allow the wheels to swivel
(fig_b). On uneven surfaces, the wheels should be set
to their fixed position.
7 FIXED OR SWIVEL FRONT WHEELS BOOK S: to fix the
front wheels, rotate the lever counter clockwise to the
locked padlock (fig_a); to release the wheels, turn the
lever clockwise to the unlocked padlock (fig_b). On
difficult terrain, we recommend using fixed wheels.
8 BRAKE: Press the lever down to apply the brake on the
chassis and lift it to release the brake.
9 ADJUSTABLE HANDLEBAR: To adjust the height of the
handlebar, press both of the side buttons at the same
time (fig_a) and swing it into the desired position
(fig_b), then release the buttons.
10 FOLDING UP: The chassis can be folded up without
the seat, with the seat facing the person pushing
(recline the backrest before folding it) or with the seat
facing forward. To fold the stroller, it is best to set
the front wheels to their fixed position and close the
hood (if fitted). Place the handle as shown in the figure
(fig_a).
Pull the inside handle on the base (fig_b) and lift it (fig_c);
the handle will drop forward until the frame is closed.
11 To ensure the frame is closed properly, check that
the side fastener is enabled (fig_a). When closed, the
frame remains in the upright position (fig_b).
12 For greater compactness, it is possible to remove the
wheels.
To remove the rear wheels: pull the pivot outwards and
remove the wheel as shown in the figure (fig_a).
To remove the front wheels: press the tab as shown, and
remove the wheel (fig_b).
TRANSPORT: the stroller can be carried comfortably
locking the front wheels and grasping the main handle
(fig_c).
GANCIOMATIC SYSTEM
13 Ganciomatic is a fast and practical system that
allows you to attach the Navetta bassinet unit, the
Primo Viaggio car seat or the Seggiolino Switch/
Seggiolino Pop Up seat to the Ganciomatic Base of
the chassis in one quick step.
Place the item on the Ganciomatic Base and press
down with both hands until it clicks into place.
Always apply the chassis or stroller brake before
attaching and removing products (refer to the
respective instruction manuals).
Check that the child transport unit is properly
attached.

SERIAL NUMBERS

14 Information about the production date can be found
on the Carrello Book Plus / Book S .
_ The product name, production date and serial number
of the chassis.
This information is required for any complaints.
ACCESSORY
15 Maxi-Cosi® - Cybex - Kiddy - Besafe car seat adaptors:
CABRIOFIX, PEEBLE, CITY, ATON / ATON 2, KIDDY
EVOLUTION PRO, BESAFE I-ZI GO+ (A).
BORSA. Diaper-Changing Bag with pad for changing
the baby (B).
CUP HOLDER: may be attached to the mushroom
button on the frame of the stroller (C).

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001 certified
company. This certification is a
guarantee for customers and consumers
of the transparency and trustworthiness
of the company's procedures and
working methods.
Peg Pérego can make changes at any time to the
models described in this publication for technical or
commercial reasons.
Peg Pérego is at the disposal of its customers and
consumers to ensure that all their demands and
queries are fully satisfied. It is a key part of our policy
to ensure we are always aware of our customers'
views and requirements. We would therefore be very
grateful if, after using a Peg Pérego product, you
take the time to fill in our CUSTOMER SATISFACTION
QUESTIONNAIRE, making a note of any comments
or suggestions you might have. You can find the
questionnaire on the Peg Pérego website: www.
pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of your Peg Pérego product should be
accidentally mislaid or damaged, use exclusively
genuine original Peg Pérego replacements. For any
repairs, replacements, product information, and
orders for genuine original replacement parts and
accessories, please contact Peg Perego After Sales
Service indicating the product serial number, if any.
tel. 0039/039/60.88.213
e-mail assistenza@pegperego.it website www.
pegperego.com
- 12 -
fax 0039/039/33.09.992