Fagor DH-22 Manual De Instrucciones página 14

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
interior
7/6/06
5. ICONS SHOWN ON THE DISPLAY
FUNCTIONS
a) The appliance will dehumidify
the air when the ambient
humidity is higher than 54%
RH. If the ambient humidity is
lower than this, the appliance
will only clean the air.
b) (continuous
dehumidification).- The
appliance will dehumidify the
air continually, regardless of
whether the ambient humidity
is high or low.
c) The appliance will only clean
the air. It will not dehumidify
it.
d) This function is for selecting
the desired relative humidity.
INDICATORS
e) When the tank is full, this
indicator will flash, three
beeps will sound and the
dehumidifier will switch off.
f) If this indication appears on
the display, the dehumidifier
is on defrost function. The
user does not need to
regulate this function, as the
appliance will automatically
go on to dehumidification
after a few minutes. The
compressor will switch off,
the fan will continue to
function, and the indicator will
remain on.
g) The time selected with the
timer appears on the display.
h) The dehumidifier speed
appears on the display:
11:09
Página 12
(FIG. 2)
(high speed)
(low speed)
i) The relative humidity percentage appears
on the display (%R.H.)
6. FUNCTIONING
(1) Plug in the appliance, and press on the
air outlet grille (7) to turn it to the desired
direction (FIG. 7)
(2) Press the
button.
The dehumidifier is supplied with the
following parameters selected by default:
If you wish to change the selection, proceed
as follows:
(3) Select the fan speed with button 6.3.:
(high speed)
(low speed)
(4) You may select a determined time
interval using the timer (6.6).
(5) Press the
button to choose the
desired function: FUZZY, CONTINUING,
AIR CLEAN or SETTING.
(6) If you have chosen the SETTING,
function, choose the desired relative
humidity using the
For example: if you select 70%, this means
the air will be dehumidified until it reaches a
percentage of 70%. The appliance will
automatically switch off if the humidity is
lower than 70% (the compressor will switch
off, but the fan will continue functioning). The
appliance will switch on again when the
humidity exceeds 70%. The same process
13
button.

Publicidad

Tabla de contenido
loading

Tabla de contenido