CASUALPLAY newmoon Instrucciones De Uso página 16

• Hold this loop (fig.8) and place it in front of the safety lock (fig.9).
• Insert the belt through the slot and pass the red coloured metal part through the loop (fig.10-
11).
• Pull the diagonal part of the seat belt until it is correctly tightened (fig.12).
• Check that the loop and the seat belt are correctly tightened (fig.13).
• Repeat the same operation with the other rear seat belt.
• Secure the baby with the Newmoon adjustable belt (fig.14-15).
Installing the Newmoon on a pushchair
NOTE: before installing the Newmoon on a pushchair, remove and store the safety
anchors.
This exclusive fastening system means the Newmoon can be used on the following pushchairs:
Jazz, S4-reverse, Avant, Kudu and Kudu mood.
For all of them the procedure to fit the Newmoon is the following:
• Put the parking brake on.
• Place the Newmoon on the pushchair, facing backwards.
• Line the Newmoon fasteners up with the slots (fig.16).
• Press downwards until it clicks fastened and a green signal appears (fig.17) in each of the
windows on the sides of the fasteners.
• To take the Newmoon off, press and then release the red button on both fasteners (red signal
in the window) and pull upwards to release it from the pushchair chassis (fig.18).
Hood functioning
• The hood has several positions.
• To unfold it, pull the hood upwards (fig.19). Do the opposite to fold it.
Maintenance
• Follow the washing instructions indicated on the different fabric care labels.
• The painted and plastic parts can be cleaned with a soapy solution, do not use abrasive
products.
14