Beurer BC 85 Instrucciones De Uso página 28

transfer will be cancelled and the morning average will be
displayed.
If you press the M2 button, the transfer is cancelled and the
measurement data of user memory
bol is no longer shown. The buttons are deactivated as soon as
a connection is established and the data is transferred.
Press the M1 button if you have selected user memory 1.
Press the M2 memory button if you have selected user
memory 2.
Average values
A flashes on the display.
The average value of all saved meas-
ured values in this user memory is
displayed.
• Press the relevant memory button
(M1 or M2).
AM flashes on the display.
The average value of the morning meas-
urements for the last 7 days is displayed
(morning: 5.00 a.m. – 9.00 a.m.).
• Press the relevant memory button
(M1 or M2).
PM flashes on the display.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
is displayed. The sym-
28
Individual measured values
• When the relevant memory button
(M1 or M2) is pressed again, the last
individual measurement is displayed
(in this example, measurement 03).
• When the relevant memory button
(M1 or M2) is pressed again, you can
view your individual measurements.
• To switch the device off again, press the START/STOP
button .
You can exit the menu at any time by pressing the
START/STOP button
Deleting measured values
• To clear the memory of the relevant user memory, you
must first select a user memory.
• Start the retrieval of the average values.
• Press and hold the M1 or M2 memory buttons for 5 sec-
onds.
CL and 00 appear on the display.
All the values in the current user memory
are deleted.
The device will then switch off automati-
cally.
Deleting individual measurements
To clear individual measurements from the relevant user mem-
ory, you must first select a user memory.
• Start individual measurement access.
.