Checking Correct Operation - Westfalia 315 097 391 101 34/04 Instrucciones De Montaje

Connecting the trailer module
10. Plug the 12-pin plug into the trailer module.
11. Fasten the trailer module (Fig. 1/1) to the left-hand side of the luggage trunk using some
Velcro tape.
12. Connect the brown and brown/white cable with the eyelet to the vehicle's ground point
(Fig. 1/2) on the left tail light.
13. Insert the supplied miniature relay (Fig. 1/3) into the relay socket. Secure the relay socket on
the cable harness using cable ties.
14. Connect the 2-pin plug to the matching counterpart on the vehicle's cable harness (Fig. 1/8)
under the right tail light.
15. Only for 13-pin trailer socket:
Using the 3-pin connector for the constant plus extension kit (Fig. 1/4), the functions
"Constant plus", "Charge lead" and "Ground for charge lead" can be retrofitted.
The constant plus extension kit is available from specialist shops under the Westfalia part no.
300 025 300 113.

Checking correct operation

16. Reconnect the ground of the vehicle's battery.
17. Check the trailer function with the help of a suitable test instrument (with load resistors) or
with the help of a trailer.
18. Secure all cables using cable ties.
19. Refit any parts removed for installation.
16 Hersteller: Westfalia Automotive GmbH & Co. KG
Installation instructions:
Electrical system for towing hitch
315 097 391 101 34/04 Peugeot 807, Citroen C8,
Fiat Ulysse, Lancia Phedra