Waeco PerfectView REC 400 Instrucciones De Montaje página 37

PerfectView REC 400
➤ Decrease or increase the parameter value using
➤ Confirm by pressing
Setting the time
You can set the time under the menu item "Time Setting".
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 35).
➤ Use or to select the parameters.
➤ Decrease or increase the parameter value using
➤ Confirm by pressing
Entering the vehicle registration number
You can enter the vehicle registration number under the menu item "Vehicle
Number Setting".
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 35).
➤ Decrease or increase the numerical value or letter of the alphabet one-by-
one using o
➤ Move one field to the right or left using
➤ Confirm by pressing
Selecting 'stop recording' when the ignition is off
You can select the switch-off time under the menu item "Power Manage-
ment", after which the video recorder switches off automatically and ceases
recording after the ignition has been switched off. The length of the interval
can amount to 0 / 30 / 60 / 90 / 120 minutes.
➤ Select the required sub-item (see chapter "Navigating through menus" on
page 35).
➤ Select the preferred interval using
➤ Confirm by pressing
EN
.
.
.
r
.
.
Setting the video recorder
or
or
or .
.
.
.
37