Important Safety Instructions - Fluval Nano Manual De Instrucciones

CONGRATULATIONS
Aquarium Filter. For a complete understanding of the filter's operation
and capabilities, please read carefully and follow these instructions.
Be certain to read the SAFETY INSTRUCTIONS before using your filter.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
- To guard against injury, basic safety precautions should be
observed, including the following:
READ AND FOLLOW ALL
1.
SAFETY INSTRUCTIONS.
2. DANGER –To avoid possible electric shock, special care should be
taken since water is employed in the use of aquarium equipment.
For each of the following situations, do not attempt repairs
yourself; return the appliance to an authorized service facility for
service or discard the appliance.
If the appliance shows any sign of abnormal water leakage or
A.
if RCD (or GFCI- Ground Fault Current Interrupter) switches off,
disconnect the power supply cord from mains and remove the
filter pump from water.
Carefully examine the appliance after installation. It should not
B.
be plugged if there is water on parts not intended to be wet.
Do not operate any appliance if it has a damaged cord or plug,
C.
or if it is malfunctioning or it is dropped or
damaged in any manner. The power cord
of this appliance cannot be replaced; if the
cord is damaged, the appliance should be
discarded. Never cut the cord.
To avoid the possibility of the appliance
D.
plug or receptacle getting wet, position the
appliance to one side of a wall mounted
receptacle to prevent water from dripping
onto the receptacle or plug. A "drip loop"
(see illustration 1) should be arranged by the
user for the cord connecting appliance to a
receptacle. The "drip loop" is that part of the
cord below the level of the receptacle or the connector if an
extension cord is used, to prevent water travelling along the
cord and coming in contact with the receptacle. If the plug or
receptacle does get wet, DON'T unplug the cord. Disconnect
on your purchase of the Fluval Nano
(illustration 1)