Layout And Items Supplied; Intended Use; Technical Data; Before Starting The Equipment - EINHELL TC-LL 2 Manual De Instrucciones

2. Layout and items supplied

2.1 Layout (Fig. 1-3)
1. On/Off switch (blocking the laser)
2. Horizontal laser
3. Vertical laser
4. LED display
5. Laser line selector button
6. Battery compartment cover
7. ¼ inch female thread
8. Universal clamp
9. Adjusting screw
10. ¼ inch male thread with wheel
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
•
Cross-line laser
•
Mounting
•
Bag
•
Original operating instructions
•
Safety information
Anl_TC_LL_2_USA_SPK7.indb 8 Anl_TC_LL_2_USA_SPK7.indb 8
EN

3. Intended use

The cross-line laser uses lasers to project lines
onto the wall and is therefore designed for
aligning objects such as tiles, windows, doors or
pictures.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.

4. Technical data

Power supply: .............. 2 x 1.5 V; type AA (LR06)
Self-leveling range: ........................................ ± 4°
Accuracy: ............. ± 3⁄16 -in. @ 30-ft (± 0.5 mm/m)
Work range: ......................................... 26 ft (8 m)
Wavelength of vertical laser: ................... 635 nm
Wavelength of horizontal laser: ................ 635 nm
Laser class: ....................................................... II
Output power: ......................................... < 1 mW
Weight: ....................................... 0.44 lbs (0.2 kg)
This standard applies to equipment designed
to be safe at least under the following
conditions:
a) Indoor use
b) Altitude up to ~6500ft (2000m)
c) Temperatures 41°F – 104°F ( 5°C – 40°C)
d) Maximum relative humidity 80%
for temperatures up to 88°F (31°C)
decreasing linearly to 50% relative
humidity at 104°F (40°C)

5. Before starting the equipment

5.1 Inserting batteries (Fig. 2)
•
Turn off the equipment using the ON/OFF
switch (1)
•
Open the battery compartment cover (6) by
pressing the nib (a) down.
•
Insert the batteries (b), ensuring that you fit
them the right way round.
- 8 -
03.04.2019 08:45:09 03.04.2019 08:45:09