Evaluating Results - Beurer BM 47 Manual De Instrucciones

Tensiómetro
Ocultar thumbs Ver también para BM 47:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
• To switch off, press the START/STOP button
If you forget to turn off the unit, it will switch off automati-
cally after approx. 1 minute.
Wait for at least 1 minute before taking another
measurement.

6. Evaluating results

Cardiac arrhythmia:
This unit can identify potential disruption of the heart rhythm
when measuring and if necessary, indicates this after the
measurement with the symbol
for arrhythmia. Arrhythmia is an illness in which the heart
rhythm is abnormal because of flaws in the bioelectrical
system that regulates the heartbeat. The symptoms (skipped
or premature heart beats, pulse being slow or too fast) can
be caused by factors such as heart disease, age, physical
make-up, excess stimulants, stress or lack of sleep. Ar-
rhythmia can only be determined through an examination by
your doctor. If the symbol
the measurement has been taken, it should be repeated.
Please ensure that you rest for 5 minutes beforehand and do
not speak or move during the measurement. If the symbol
appears frequently, please consult your doctor. Self-
diagnosis and treatment based on the measurements can be
dangerous. Always follow your GP's instructions.
.
. This can be an indicator
is shown on the display after
Risk indicator:
The measurements can be classified and evaluated in ac-
cordance with the following table.
However, these standard values serve only as a
general guideline, as the individual blood pressure
varies in different people and different age groups
etc.
It is important to consult your doctor regularly for advice.
Your doctor will tell you your individual values for normal
blood pressure as well as the value above which your blood
pressure is classified as dangerous.
The bar chart on the display and the scale on the unit show
which category the recorded blood pressure values fall into.
If the values of systole and diastole fall into two different
categories (e.g. systole in the High normal category and
diastole in the Normal category), the graphical classification
on the device always shows the higher category; for the
example given this would be High normal.
27

Publicidad

Tabla de contenido
loading

Tabla de contenido