Blood pressure
Systole
value category
(in mmHg)
Setting 3:
severe
≥ 180
hypertension
Setting 2:
moderate
160 – 179 100 – 109
hypertension
Setting 1:
mild
140 – 159 90 – 99
hypertension
High normal
130 – 139 85 – 89
Normal
120 – 129 80 – 84
Optimal
< 120
Source: WHO, 1999 (World Health Organization)
7. Saving, displaying and deleting
measurements
• The results of every successful measurement are stored
together with the date and time. If there are more than
30 measurements, the oldest measurements are lost.
• Press the - or + function button. Select the desired user
memory (
...
) by pressing the -/+ function button.
Confirm your selection with the START/STOP button
Diastole
Action
(in mmHg)
seek medical
≥ 110
attention
seek medical
attention
regular monito-
ring by doctor
regular monito-
ring by doctor
self-monitoring
< 80
self-monitoring
• If you press the memory button M, the average value of
all the stored measured values in the user memory will be
displayed. If you press the memory button M again, the
average value of the morning measurements for the last 7
days will be displayed. (morning: 5.00 – 9.00, display
If you press the memory button M again, the average
value of the evening measurements for the last 7 days will
be displayed. (evening: 18.00 – 20.00, display
continue to press the memory button M, the most recent
individual measured values are displayed in turn with the
date and time.
• You can delete the memory by pressing and holding the
memory button M for 3 seconds.
• To switch off, press the START/STOP button
• If you forget to switch off the unit, it will switch off auto-
matically after 1 minute.
8. Error message/trouble shooting
In the event of errors, the error message
display.
Error messages may appear if:
• systolic or diastolic pressure could not be measured (
or
appears on the display)
• systolic or diastolic pressure was outside the measure-
ment range ( or Lo Lo appears on the display)
.
28
).
). If you
.
_ appears on the