Samsung DSB-9601C Instrucciones De Uso página 32

CONNECTING YOUR "DSB-9601C"
6. CONNECTING EXTERNAL AUDIO / HI-FI SYSTEM
To connect any external Audio Hi-Fi system, the receiver has been provided with two RCA
connectors at the rear panel of the receiver, marked with AUDIO L and R respectively to
connect the left and right Audio.
7. CONNECTING DIGITAL AUDIO SYSTEM
Connect a fiber optic cable between Optical SPDIF on the receiver and Optical SPDIF on the
Digital Audio System.
8. INSERTING COMMON INTERFACE CAM AND SMARTCARD
The DSB-9601C supports Common Interface CAMs under DVB specification.
The CI CAMs include a built-in smart card reader.
Insert the smart card into the CAM gently with the gold colored chip upwards
Slide in the CAM gently inside the slot so that it sits in the socket tightly.
To remove the CAM push the button provided by the side of the CAM slot.
The CAM will be ejected from the socket.
N N o o t t e e : The following Common Interface CAMs are available now:
IRDETO, CONAX, CRYPTOWORKS, VIACCESS, NAGRAVISION, SECA, Etc.
Connecting Figure
GB-8
P E R S O N A L V I D E
Connecting Antenna
We recommend one of the following installation diagrams because of the LNB specifications for
selecting RF signal band by DC voltage and 22KHz Tone.
1. Two separated Antennas
The connection type in Satellite Connection menu
should be set to separate.
2. One Dual Antenna
The connection type in Satellite Connection menu
should be set to separate.
3. One Antenna (Loop Through)
The connection type in Satellite Connection menu
should be set to loop through.
Tuner 1 and 2 can receive the RF signal of the
same polarity and the same band.
4. Two separated dual LNB Antenna and
DiSEqC switches
The connection type in Satellite Connection menu
should be set to separate.
O R E C O R D E R C O M M O N I
CONNECTING YOUR "DSB-9601C"
GB-9
N T E R F A C E