Bluetooth Operation - Roadstar HRA-9D+BT Manual De Instrucciones

5 English
You can program up to 99 tracks to play in any desired order.
1. Insert a disc and press STOP (11) (6 on remote) when it starts playing.
2. Press (8) on remote. "P01" will be shown on the display.
3. Press SKIP -/+ (7/8) (12/13 on remote) to select your favorite tunes.
4. Press (8) on remote to store the track in the program memory. "P02" will be
shown on the display.
5. Repeat steps 3-4 to select and store all desired tracks.
6. Press PLAY/PAUSE (9) (9 on remote) to start program play.
7. Press STOP (11) (6 on remote) once to stop the program play. Press STOP (11)
(6 on remote) twice to clear programme.
AUX-IN
This unit provides an auxiliary audio input jack for connecting external audio device
like MP3 players, CD players and allow playback of your external source through
the system speakers.
1. Use an audio cable (not included) with a RCA stereo plugs on one end of the ca-
ble. Plug one end into the AUX-IN jack on the main unit and plug the other end
of the cable into the LINE OUT or HEADPHONE Jack of your external audio de-
vice.
2. Turn ON the unit and your external audio device. Press MODE (3) (5 on remote)
repeatedly to select CD mode.
3. Start to play the external device (see the user manual of the external device).

BLUETOOTH OPERATION

1. Press MODE (3) (5 on remote) repeatedly to select BT mode.
2. Select from your portable device (Smartphone, Tablet...) the ID Bluetooth tagged
as HRA-9D+BT, then confirm connection.
3. When the pairing is successful the LED will stop blinking.
4. Now you can transfer the music to the HRA-9D+BT and all operations can only
be operated from your mobile device.
PLAYBACK FROM USB
1. Insert the USB device's plug into the USB socket.
2. Press MODE (3) (5 on remote) repeatedly to select USB mode.
3. The unit will start reading the device automatically after the connection.
4. Use the same procedure as CD to listen to your USB device.
DELETE USB
1. During playback, press and hold REC (10) (4 on remote). "DEL" will be shown
on the display.
2. Press SKIP -/+ (7/8) (12/13 on remote) repeatedly to select between ONE/
FOLDER/ALL.
3. Press REC (10) (4 on remote) again to confirm.