Aux Operation; Random Play; Usb Operation - Roadstar CLR-2540UMPSL Manual De Instrucciones

on remote until "REPEAT" disappears from the display.
To Repeat all the Tracks
1. Press REPEAT / RANDOM BUTTON (11) on unit or (13) on remote until the
"REPEAT ALL" shows steady on the display, all tracks on the disc will be played
over and over again till you press STOP BUTTON (13) on unit or (16) on remo-
te.
2. To cancel repeat play, press REPEAT / RANDOM BUTTON (11) on unit or (13)
on remote until "REPEAT ALL" disappears from the display.
To Repeat the Folder
1. Press REPEAT / RANDOM BUTTON (11) on unit or (13) on remote until
"REPEAT" show steady on the display, the current folder will be repeated over
and over again till you press STOP BUTTON (13) on unit or (16) on remote.
2. To cancel repeat play, press REPEAT / RANDOM BUTTON (11) on unit or (13)
on remote until "REPEAT" and the local folder disappear from the display.

RANDOM PLAY

Press REPEAT / RANDOM BUTTON (11) on unit or (13) on remote in play mode till
the "RAND" shows steady on the display, the random play will start from next track
automatically, until all tracks are played over and then it will stop. Press REPEAT /
RANDOM BUTTON (11) on unit or (13) on remote again until the "RAND" disappe-
ars from the display.

USB OPERATION

1. Press the FUNCTION button on unit or on remote to select "USB" mode.
2. Connect the USB to the USB INPUT. The playback stars from track 1 automati-
cally after reading the USB.
3. Press STOP BUTTON (13) on unit or (16) on remote to stop playing. The
display will show total number of USB and STOP.
4. Proceed repeat play (repeat 1- repeat folder - repeat all)/program play/skip up
and back operation as the same described in above "CD/MP3 OPERATION".
CAUTION: Do not use any USB extension cable for connecting the USB bar which
may cause harmful interference.
English 9 10 English

AUX OPERATION

1. Press the FUNCTION button to select "AUX" mode.
2. Insert the AUX line plug into the AUX IN jack (3.5mm) on the player, music from
the device would be amplified and exported from the speakers.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY of the external audio source (eg. MP3 player) to start playback.
SPECIFICATIONS
FM Band:
Power Supply:
Design and specifications are subject to change without notice.
87.5 to 108 MHz
DC 6V (adapter)