Approved Power Unit; Part Description; Safety Precautions; Important Safety Instructions - Makita EE400MP Manual De Instrucciones

Approved power unit

This attachment is approved to use only with the following power
unit(s):
EX2650LH Multi function power head
BUX360, BUX361, BUX362, UX360D, UX361D, UX362D
Cordless multi function power head
Only for countries other than the U.S. and Canada:
DUX60 Cordless multi function power head
WARNING:
Never use the attachment with non-approved power unit.
Non-approved combination may cause serious injury.

Part description

2
5
4
The numbers below refer to the figure.
1. Shaft
2. Blade case
3. Wheel
4. Gear case
5. Blade

Safety precautions

WARNING:
Read all safety warnings and all instructions in this booklet
and the instruction manual of the power unit. Failure to follow
the warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term "edger" and "equipment" in the warnings and precautions
refer to the combination of the attachment and the power unit.
The term "motor" in the warnings and precautions refers to the
engine or electric motor of the power unit.

IMPORTANT SAFETY INSTRUCTIONS

DANGER – When using your edger, follow basic precautions,
including the following:
a) READ AND FOLLOW ALL INSTRUCTIONS – Read the
instruction manual carefully. Be thoroughly familiar with the
controls and the proper use of the equipment. Know how to stop
the unit and disengage the controls quickly.
b) DRESS PROPERLY – Wear safety glasses or goggles. Do
not wear loose clothing or jewelry. They can be caught in
moving parts. Use of sturdy gloves and safety footwear is
recommended.
c) STAY ALERT – Watch what you are doing – use common sense.
Do not operate product when fatigued or under the influence of
alcohol or drugs.
d) CAUTION – To reduce the risk of fire, replace gasoline cap
securely.
e) DANGER – ROTATING CUTTING TOOL –
– Keep both hands on handles when blade is rotating.
– Keep feet away from cutting area.
1
3
– Do not attempt to remove cut material nor hold material to be
cut when motor is running or when cutting tool is moving.
– Make sure spark plug is disconnected when clearing jammed
material from cutting tool.
– CAUTION – Cutting tool coasts after turn off.
f) KEEP OPERATING AREA CLEAR – Keep the area of operation
clear of all persons, particularly small children and pets.
g) USE EDGER PROPERLY – Use only for edging the type
of shrub, growth, and the like described in the operating
instructions. Do not abuse product. Do not use product in rain or
wet locations. Never allow children to operate the product. Never
allow adults to operate the product without proper instruction.
h) DON'T OVERREACH OR STAND ON UNSTABLE SUPPORT –
Keep good footing and balance at all times.
i) DISCONNECT (UNPLUG) SPARK PLUG LEAD –
– When not in use.
– Before servicing, cleaning, and the like.
– Before changing accessories.
j) MAINTAIN PRODUCT WITH CARE –
– Follow maintenance instructions given in Manual.
– To reduce the risk of fire, do not allow excessive grass,
leaves, or grease to accumulate on the product.
k) STORE PRODUCT INDOORS – When not in use, store product
indoors in a dry place locked or otherwise inaccessible to
children.
l) DO NOT ATTEMPT TO REPAIR PRODUCT –
– Have repairs made by qualified dealer or repairman.
– See that only identical replacement parts are used.
Instructions pertaining to a risk of fire or injury to
persons
a) Do not operate product when barefoot or wearing open sandals.
Always wear safety footwear, and pants or slacks that cover your
legs.
b) Do not use the product on graveled surfaces.
c) Never operate the product without visibility or light.
d) Start motor carefully. Make certain all attachments are
disengaged before attempting to start. Keep hands, feet, and
clothing away from cutting tool and moving parts.
e) Never attempt to make any adjustments while the motor
is running (except where specifically recommended by the
manufacturer).
f) Never direct discharge of material toward bystanders nor
allow anyone near the area of operation. Use care in directing
discharge to avoid glass enclosures, automobiles, and similar
objects.
g) Stay alert for uneven sidewalks, holes in terrain or other similar
conditions when using product. Always push slowly over rough
ground.
h) Objects struck by the cutting tool can cause severe injuries to
persons. The lawn should always be carefully examined and
cleared of all objects prior to edging.
i) If product strikes a foreign object follow these steps:
1) Stop product.
2) Disconnect spark plug lead.
3) Inspect for damage.
4) Repair any damage before restarting and operating the
product.
j) Disengage the cutting tool when the product is transported or not
in use.
k) Take all possible precautions when leaving the product
unattended. Disengage attachments, and stop the motor.
l) When cleaning, repairing, or inspecting, make certain the cutting
tool and all moving parts have stopped. Remove the battery, or
disconnect the spark plug wire, and keep the wire away from the
plug so that unintentional starting does not occur.
m) Never operate the product without guards, plates, or other
protective devices in place.
n) Use only accessories and attachments supplied or specifically
recommended for use with the product.
o) Do not operate product with a damaged or excessively worn
cutting tool.
Intended use
• This equipment is only intended for edging the lawn in
conjunction with an approved power unit. Never use the
attachment for the other purpose. Abusing the attachment may
cause serious injury.
3