Bose LIFESTYLE Serie Guía De Uso página 30

Controlling External Sources
Figure 10
Changing the TV Power
30
7. Set the TV to turn on automatically*, as needed:
• Move up to the System menu categories and over to Video.
• From the Video options, select
• Move right into the list of choices and up or down to select one of the two below:
– (for TV models that do not use a European style SCART connector)
Automatic
– (for TV models that use a SCART connector)
Euro Connector
• Press the Enter button.
TV Power:
TV Power Status:
TV Aspect Ratio:
Widescreen DVDs:
Video Connector:
Video Black Level:
The Media Center can turn your TV on automatically whenever
you select a video source.
navigate select
8. Notice the
TV Power Status
• means the installed TV sensor is working.
TV Detected
• means the TV sensor (if installed) is not positioned properly, or a
TV Not Detected
SCART connector is installed.
• Press System or Exit to leave the System menu.
Note: For information and on using the TV sensor, refer to "Installing the TV on/off sensor" in
your Install Guide.To check for positioning of the sensor, refer to "The media center" on page 14.
*For the Automatic feature to work effectively with North American TV models, the optional
TV sensor must be installed and positioned to detect if the TV is on or off. In Europe, a
SCART connector serves this purpose. If you do not use a SCART connector, or the TV sen-
sor is not positioned properly, the automatic feature is not an option. In that case, leave the
set to . This means you must turn your TV on using its power button or with
TV Power Manual
®
the LIFESTYLE remote (when it is set to do so).
(Figure 10).
TV Power
Video
Manual
TV Not Detected
- -
- -
Component
Normal
: