Samsung WF395BTPA Serie Manual Del Usuario página 25

My Cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button
convenience. By pushing the My Cycle button, you activate the settings used during the My
Cycle mode. The "My Cycle" light goes on, indicating activation. You can select all options as
follows in "My Cycle" mode.
1. Press the My Cycle button on the Control Panel.
2. Select the cycle using the Cycle Selector dial.
3. After cycle selection, set each option.
See page 37 for available option settings with each cycle.
4. Start "My Cycle" by pushing the Start/Pause button in "My Cycle" mode.
The washer will display the cycle and options you selected the next time you choose "My
Cycle".
You can change the "My Cycle" settings by repeating the process above.
The washer displays the last settings used the next time you choose "My Cycle".
To program "My Cycle" settings into your washer, the washer needs to complete an entire
wash cycle. If for any reason the wash cycle is interrupted and the washer does not fi nish
the cycle, it will not program in the settings for later use.
WF395BTPA-03145B-02_EN_20120829.indd Sec11:25 WF395BTPA-03145B-02_EN_20120829.indd Sec11:25
Washing a load of laundry _25
2012-08-31 2012-08-31 12:36:22 12:36:22