Mustang Fender GT40 Manual Instrucciones De Uso página 22

In presets that include Modulation effects, Delay effects or both*, the TAP utility button flashes in time with
the default rate of the first delay effect in the signal path (or first modulation effect if no delay effect is present).
This rate can be left as is, or it can be modified using the TAP utility button. To set a new TAP tempo, tap the
flashing TAP utility button at the desired tempo at least two times (see illustration below). The TAP utility button
will function regardless of which layer is highlighted (PRESET LAYER, SIGNAL PATH LAYER or CONTROLS LAYER).
To change the tempo of the first delay effect (or modulation effect if no delay effect is present), tap
Various time parameters for all delay and modulation effects in the signal path can be adjusted in the CON-
TROLS LAYER without use of the TAP utility button. In the SIGNAL PATH LAYER, use the ENCODER to high-
light the delay or modulation effect to be modified; its controls will then appear in the CONTROLS LAYER.
Enter the CONTROLS LAYER by pressing its corresponding layer button, and scroll to the time parameter to
be changed using the ENCODER. Press and turn the ENCODER to select and adjust the desired time value,
during which the window containing the time value will turn red; press the ENCODER again to keep the new
time value (see illustration below).
Delay and modulation effects tempos can also be changed by highlighting the time parameter's numerical value in the
CONTROLS LAYER, then pressing and turning the ENCODER to set the desired tempo.
USING THE TAP TEMPO BUTTON
ROCK & ROLL
TWIN
FUZZ REVERB
REVERB
the TAP utility button at the desired tempo.
ROCK & ROLL
POST FX 2
DELAY
DELUXE DELAY
REVERB 1 2
60ms
DELAY TIME
LEVEL
* Mustang GT modulation and delay effects are listed on pages 22 and 23.
TAP
TAP
20