Mustang Fender GT40 Manual Instrucciones De Uso página 42

The MGT-4 Footswitch can also be used for hands-free tuning. To do this, step on and briefly hold FUNCTION
button 3 (labeled "HOLD TUNER" for this purpose; yellow arrow) to activate the chromatic tuner. The note closest
to the sought-after pitch appears in the DISPLAY WINDOW; two red FUNCTION LEDs along upper left illuminate
to indicate degrees of flatness, while two red FUNCTION LEDs along upper right illuminate to indicate degrees of
sharpness. When correct pitch is attained, the center FUNCTION LED beneath the DISPLAY WINDOW illuminates
green. When tuning is completed, step on FUNCTION button 3 again to return to play mode (see illustrations
below). Note that MGT-4 Footswitch tuner use mutes speaker output.
QA
MODE
To activate the MGT-4 Footswitch tuning function, step on and briefly hold FUNCTION button 3 (yellow arrow). In the example
shown here, an "A" note is displayed as being particularly flat, as indicated by the red FUNCTION LED at upper far left (green arrow).
QA
MODE
PRESETS
EFFECTS
In the example shown here, the "A" note is displayed as being slightly sharp, as indicated
QA
MODE
PRESETS
EFFECTS
In the example shown here, the "A" note is displayed as being at the correct pitch, as indicated by the green
FUNCTION LED centered below the DISPLAY WINDOW (yellow arrow). When tuning is complete, step on
MGT-4 FOOTSWITCH: TUNER
BANK DOWN
PRESETS 1
EFFECTS FX 1
LOOPER REC/DUB
BANK DOWN
1
FX 1
LOOPER REC/DUB
by the red FUNCTION LED at upper inside right (yellow arrow).
BANK DOWN
1
FX 1
LOOPER REC/DUB
FUNCTION button 3 (green arrow) to exit the footswitch tuning function.
BANK UP
2
FX 2
MGT-4 PLAY/STOP
BANK UP
2
FX 2
MGT-4 PLAY/STOP
BANK UP
2
FX 2
MGT-4 PLAY/STOP
40
ASSY. P/N 7710238000
HOLD
TUNER
3
FX 3
UNDO
ASSY. P/N 7710238000
HOLD
TUNER
3
FX 3
UNDO
ASSY. P/N 7710238000
HOLD
TUNER
3
FX 3
UNDO