Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
QUICK
REFERENCE
If the remote control
fails to operate
TV/DVD functions,
replace
the batteries
in the remote control
unit
t Open the battery cover
.....
2 Insert two "AA" size batteries
(supplied
with the product)
3 Close the battery cover
/
• Place the batteries with their terminals
corresponding
to the (+) and (-)
indications in the battery compartment
Improper use of batteries can result in chemical leakage or explosion
Be sure to follow the instructions below
• De not mlx batteries of different types. Different types of batteries have different characteristics
• Do not mix old and new batteries Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries
• Remove batteries as soon as they are worn out Chemicals that leak from batteries that come in contact with skin can
cause a rash If you find any chemical leakage, wipe thoroughly with a cloth
• The balteries supplied with this produc! may have a shorter }ire expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it
Remote control
30°
sensor
IMPORTANT:
The POWER indicator on the television should light GREEN indicating you have power to the TV/DVD
If the POWER
indicator
on the television
still does not light up, press POWER
on the remote control
to turn the
power on
IMPORTANT:
IF THE UNIT DOES NOT POWER
ON - UNPLUG
THE TELEVISION
FROM THE OUTLET
AND REPEAT THE
INSTALLATION
STEPS.
IF YOU STILL ENCOUNTER
NO POWER,
PLEASE
CONTACT
US AT !-800-BE-SHARP.
Please refer to the BASIC ADJUSTMENT SETTINGS SECTION and basic Initial setup functions and USING
EXTERNAL EQUfPMENT SECTION for other device connections (DVD, VCR, AUDIO, etc) in your operation
manual
Publicidad
Tabla de contenido
Solución de problemas
