Equipment Characteristics - JOSMOSE 8040 Serie Manual De Usuario

- Manganese (Mn) < 0.05 mg/L.
- Aluminum (Al) < 0.05 mg/L.
- Absence of hydrogen sulfide (H
- Absence of Iron (Fe), Barium (Ba), Strontium (Sr) and fluoride (F).
- Maximum water temperature 30ºC.
- Design temperature: 25ºC.

04 EQUIPMENT CHARACTERISTICS

Prefiltration of sediments up to 5μ filtration grade.
High pressure multistage vertical pump.
Electric motor of the pump with high energy efficiency class IE3.
Flow meters of osmotized water (permeate) / concentrated water (rejection) /
recirculation water.
Pressure gauge for high and low pressure control.
Control of the functions of the equipment by means of LED indicators.
Programmable digital relay control of the process of reverse osmosis:
Input water input control.
On and off the high pressure pump.
Safety control due to lack of pressure or overpressure in the system.
Automatic flushing with feed water to the plant.
Electric float control connection for accumulation of produced water tank
(essential for the stop order when the accumulation tank is full)
Low pressure switch control.
High pressure switch control.
Osmotized water conductivity meter (permeated)
Water temperature range entered between 10 - 30 ºC.
Resistance membranes at pH between 3 - 11 units.
Membranes up to 8" ultra low pressure in standard equipment, with the possibility
of installing low pressure membranes.
PVC tubes PN16 on the low pressure side and stainless steel with resistant
connections up to a PN16 on the high pressure side.
Pre-installation in the electrical panel for connection of chemical product dosing
equipment.
Control of electrical connection signal of pretreatment equipment.
Maximum conversion between 50-75%.
Working pressure of the equipment between 7 and 14 bars.
Noise <70db ± 5 db
S).
2
45
8040_6000TDS_std_V1.3