Downloading The Application - bewell connect MyTens Pro Manual Del Usuario

4.5. DOWNLOADING THE APPLICATION

Download the BewellConnect® application to your phone or tablet:
- by the App store or Google Play
- or by flashing the QR Code on the side of the box.
Then click the MyTens icon.
4.6. STARTING AND USING MYTENS
Preparation of the treatment areas and installation of myTens
1. Before placing the electrodes, check that the skin does not show injury or redness and is
healthy.
• Transcutaneous electrical neurostimulation (TENS) programmes : Do not position the elec-
trodes on irritated skin or skin with open wounds, rashes or cancerous lesions
• Electrical muscle stimulation (EMS) programmes : Position the electrodes only on intact and
healthy muscles.
2. Using a damp cloth, clean the skin and then dry it. To receive the electrodes, it must be clean
and dry, without cream or lotion. Any oil, dust or other element that may be on the skin could
prevent the electrodes from adhering.
3. Remove the electrodes from the bag, ensure they are not damaged or worn. If the expiry limit
is exceeded, do not use these electrodes.
4. Attach the electrodes to the device using the pressure buttons provided for this purpose.
5. Put the first electrode on the treatment area chosen. See the section "Arranging the elec-
trodes" and the electrode positioning diagrams at the end of this manual (see paragraph 10).
6. Put the second electrode on the area of the body to treat (Voir paragraphe 10). Avoid any
contact between the electrodes and not place one on the other.
7. To apply the second pair of electrodes, proceed in the same manner (steps 1 to 6). The second
pair must be placed symmetrically (e.g. for treatment of the left thigh with one pair of elec-
trodes, the second pair must be applied symmetrically on the right thigh). The intensity of the
electrical impulses will be identical in both pairs, unless otherwise selected.
Remarks
- It is possible to perform a session dressed. Simply place the electrodes and the devices fixed
under clothing.
- You can keep a device on the body, even between two sessions.
- It is possible that you may need external assistance for placing the electrodes in certain areas.
Locating the electrodes
Warning
As indicated in "Do not treat the the following parts or areas" :
Do not place the electrodes on the head, carotid, on any side of the neck, at the front of the neck
or on the torso. Do not position the electrodes on swollen skin or skin with open wounds, rashes
or cancerous lesions or on irritated skin.
BewellConnect - BW-TS1 - User Manual - 072015
44
The effectiveness of your sessions will depend in part on how you place your electrodes on the
skin. You are advised to place the electrodes at the level of the area to be treated or in the vici-
nity of this area. Before installing the electrodes in a place, ensure you have good feeling in the
area. If in doubt about the ideal place, do not hesitate to move the electrodes to find the best
feeling. In case of proven effectiveness on a specific area, do not hesitate to note the place for
using there again. If you suffer discomfort (unpleasant contractions during burst electrical neu-
rostimulation programmes), it is advisable to move the electrodes. If during electrical muscle
stimulation programmes (intended especially to create a contraction of the muscle) no contrac-
tion occurs, this may mean an intensity too low or bad installation of the electrodes.
Starting a session through the use of the MyTens application
1. Ensure that the Bluetooth (4.0) connection is activated on your smartphone or tablet. Open
the MyTens application .
2. Press the on/off button so that the appliance is put on standby mode (Continuous green light :
Standby mode, ready for the session). The App detects the MyTens which is switched on. In
case of inactivity for more than 5 min, the device switches off. Press the on/off button again
to begin a session.
3. Choose between a TENS session (transcutaneous electrical neurostimulation) or EMS session
(neuromuscular electrical stimulation).
4. In the case of past use of MyTens, you can start again the last session or choose another one
in the history.
History Button
BewellConnect - BW-TS1 - User Manual - 072015
45