Technical Characteristics - bewell connect MyTens Pro Manual Del Usuario

- The use of accessories, transducers and cables other than those mentioned or provided by
the manufacturer of this equipment could result in increased electromagnetic emissions or
decreased electromagnetic immunity of this equipment and increase the risk of malfunction

9. TECHNICAL CHARACTERISTICS

Units
Programmes
Battery
Output voltage
Conditions of use
Storage conditions
Dimensions
Weight
IP classification system
Wave form
Impulse width
Heart rhythm
Treatment time
Adapter
50 BewellConnect - BW-TS1 - User Manual - 072015
4 devices (49.9mmx55.8mm)
19 programmes (11 TENS + 8 EMS programmes)
3.7V/500mAh Li-lon
max 60mA ±10% (1000Ω load)
5°C to 40°C with a relative humidity of 15% to 93%,
atmospheric pressure of 700 to 1060 hPa
-10°C to 50°C with a relative humidity of 10% to
90%, atmospheric pressure of 700 to 1060 hPa
440x54x13mm cable included
55g (±20%) by unit
IP22
Biphasic square wave
150us~370us (±10%)
2Hz~100Hz (±10%)
1-90 minutes (±10%) given by the application
1pc (Input : 100-240 V AC 50/60Hz Output : 5 V DC
300mA)
10. PLACING THE ELECTRODES
10.1. POSITION OF THE ELECTRODES-TENS PROGRAMMES
Shoulder
Shoul- pain and
der wrinkled
shoulder
Pain in
Lumbar
the lower
areas
back
Pain in the
Elbow
elbow
Fore- Pain in the
arm forearm
Pain in
the wrist
Wrist and carpal
tunnel
syndrome
Pain in
Hip
the hip
BewellConnect - BW-TS1 - User Manual - 072015 51