Panelling - Fagor 1FFC-41 MPI Manual De Instrucciones

PANELLING (Panels models only)
For panelling you must to remove the doors. The instructions are contained in the
section on "Changing the direction of door opening".
1
Dimensions of the
refrigerator furniture
and door panels.
(Panel thickness less than 4 mm)
2
Remove the handle
and/or frame from
the left-hand side of
the door by
removing the
corresponding
screws.
3
Loosen the remaining
screws around the
door, removing the
frames as shown in
the diagram and
sliding the panel in.
4
Hold the rim of the
frame against the panel
and insert the frame
screws in that position.
Locate the frame and/or
the handle with their
screws.
A
F
14
A B
1FFC-41
1710 598
MPI
D
1FFC-47
1860 598
MPI
1FFC-48
2010 598
MPI
E
1FFC-49
2010 598
MPI
C D E F
594 953 604 560
594 1103 604 560
594 1253 604 560
594 1103 754 560