Playing Back Music Via Bluetooth - AEG MC 4465 BT Instrucciones De Servicio

4. Press the MEM/CLK-ADJ button. The radio sta-
tion will be preset.
Switching between stereo/mono (AUTO/MONO)
In the event of poor reception, you have the following two
options:
• Change the position of the wire antenna.
• Use the ST/MO/ button (20) to switch to mono recep-
tion.
NOTE:
During stereo reception, the symbol "
in the display.
Selecting preset radio stations
The preset radio stations may be selected by repeatedly
pressing the FOLDER/PRE / FOLDER/PRE buttons.
Playing CDs/MP3
1. Select the CD mode with the FUNCTION button (4). The
following will appear in the display "CD".
2. Open the CD tray (15), by pressing the button (10).
3. Place a CD with the printed side facing upwards on the
CD tray.
4. Close the CD compartment by pressing the button
again. The display will show "READING", followed a little
bit later by "01- 00:00" indicating the first song.
NOTE:
• When inserting MP3 CDs, the display will first show
"A01 T001" indicating the first folder (A) and then
show the first song (T).
• For storage media with more than 999 songs, the
display will not show the thousands digit.
5. The CD will play from the first title. The elapsed playing
time and the current track will be shown in the display.
Always keep the CD compartment closed.
NOTE:
• If a disc is inserted the wrong way around, respectively
if no disc is inserted, then the message "READING" will
blink and "NO DISC" appears on the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and CD
media available.

Playing back music via Bluetooth

Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
" will be shown
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Use the FUNCTION button (4) to select BT mode. The
display shows "PAIRING". This signalizes that the device
is in pairing mode.
3. Choose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device "AEG MC 4465 BT"
will show in your player as a selection.
NOTE:
Only one playback device can be connected with the
device at one time. If the device is already connected
with another playback device, the device will not appe-
ar in the BT selection menu.
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
After successful registration, "BT" appears in the display. For
the further procedure, please refer to the user manual of the
playback unit. If possible, adjust the volume of the external
unit to a comfortable level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
English
51