Storing Stations; Playing Back Music Via Bluetooth - AEG SR 4359 BT Instrucciones De Servicio

English
48
Press the /PAIR button (16). The device is search-
ing the complete FM frequency band for radio
stations. The stations found are stored ascending by
frequency.
• Searching for radio stations manually:
Turn the TUNING control (6) until you have found the
radio station that you are looking for.

Storing stations:

1. Search for the desired radio station with the
TUNING control (6).
2. In order to store the radio station, press the
PROG./P-MODE button (19). The notification
"P 01" will blink in the display and "MEM" is
shown.
3. Use the /+10 / /-10 buttons (18) to select the
desired memory location.
4. Press the PROG./P-MODE butto. The radio
station will be stored.
NOTE:
If there is noise from the station received, we recommend
that you switch to MONO. Press the MO/ST button (3 on
the remote control) to select MONO or STEREO.
Selecting stored radio stations
The stored radio stations can be selected by repeatedly
pressing the /+10 / /-10 buttons.
Playing CDs/MP3
1. Select the CD mode with the FUNC button (21).
The following will appear in the display "CD".
2. Open the CD tray (3) by pressing the PUSH TO OPEN
button (5).
3. Insert an audio CD with the printed side facing upwards
on to the central cone so that the CD clicks into place
and then close the lid of the CD compartment.
4. The total number of tracks and the playing duration will
be shown in the display after a few seconds.
NOTE:
The number of folders and the total number of tracks
will be shown with CDs in the MP3 format.
5. The CD will play from the first title. The elapsed playing
time and the current track will be shown in the display.
If available, the ID3 tag Meta data will additionally alter-
nately be shown as a continuous band with CDs in the
MP3 format. When the ID3 function is shut off, the current
track and the folder will be shown alternately.
6. In order to remove a CD, please press the STOP button
(17), open the CD compartment and lift the CD out care-
fully.
Always keep the CD deck closed.
All manuals and user guides at all-guides.com
• If a disc is inserted the wrong way around, respectively if
• Playback of CDs produced by the user cannot be

Playing back music via Bluetooth

Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
2. Select the BLUETOOTH mode using the FUNC button
3. Choose the Bluetooth menu in your player and register
NOTE:
no disc is inserted, then the message "READ" will blink
and "NO DISC" appears on the display.
guaranteed due to the large variety of software and CD
media available.
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
(21). The control light PAIR/STANDBY will blink blue. This
signalizes that the device is in pairing mode.
the device in your player. For this, refer to the operation
manual of your player. The device "AEG SR 4359 BT" will
show in your player as a selection.
NOTE:
• Only one playback device can be connected with
the device at one time. If the device is already con-
nected with another playback device, the device
will not appear in the BT selection menu.
• To disconnect an existing Bluetooth connection,
keep the /PAIR button (16) pressed down. The
PAIR/STANDBY control lamp (8) flashes blue.