Playing Back Music Via Bluetooth - AEG SR 4357 BT Instrucciones De Servicio

4. Press the MODE/MEM/FOLDER button. The radio
station will be stored.
4. For FM stations, you can use the PLAY/PAUSE button
(10) to switch between mono and stereo reception. We
recommend that you switch to mono in case of bad
reception. The message "
stereo reception.
Select the preset radio station
The preset radio stations can be selected by repeatedly
pressing the STOP/M+ button (12).
Playing CDs/MP3
1. Select the CD mode with the POWER/SOURCE button
(11). The following will appear in the display "- - -".
2. Open the CD compartment (3) by pulling the lid upwards
by the tab (4).
3. Insert an audio CD with the printed side facing upwards
on to the central cone so that the CD clicks into place
and then close the lid of the CD compartment.
4. After a few seconds the total number of songs/tracks is
shown in the display.
NOTE:
In the case of CDs in MP3 format the number of folders
is briefly displayed at first.
5. The CD will play from the first title. The elapsed play time
and the message "CD " respectively "MP3
shown in the display.
6. In order to remove a CD, please press the STOP/MEM
button (12), open the CD compartment and lift the CD
out carefully.
Always keep the CD deck closed.
NOTE:
• If a disc is inserted the wrong way around, respectively
if no disc is inserted, then the message "- - -" will blink
and "NO" appears on the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and CD
media available.

Playing back music via Bluetooth

Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (Industrial, Scientific and Medical). Interference
can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
All manuals and user guides at all-guides.com
" is shown on the display for
" are
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (Advanced
Audio Distribution Profile) and has a music-player function,
then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (Audio Video Remote
Control Profile).
Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.
Logging on devices (Pairing)
Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your
player (e.g. mobile phone). For this, refer to the operation
manual of your player.
2. Press the POWER/SOURCE button (11) repeatedly, until
"bt" is shown on the display. The symbol " " will blink
in the display. This signalizes that the device is in pairing
mode.
3. Chose the Bluetooth menu in your player and register
the device in your player. For this, refer to the operation
manual of your player. The device "AEG SR 4357 BT" will
show in your player as a selection.
NOTE:
Only one playback device can be connected with the
device at one time. If the device is already connected
with another playback device, the device will not ap-
pear in the BT selection menu.
4. Now enter the password "0000" in your player, depend-
ing on the device manufacturers, model, and software
version.
If the registration was performed successfully, the symbol
" " will light up in the display. For the further procedure,
please refer to the user manual of the playback unit. If pos-
sible, adjust the volume of the external unit to a comfortable
level.
NOTE:
• Depending on the device manufacturer, you need to
perform the registration (PAIRING) again to connect the
devices.
• In case of problems with the registration of a replay
device, deactivate the WiFi-/ and mobile data function
in your playback device.
• The Bluetooth compatibility cannot be ensured for
devices (e.g. mobile phones) getting released in the
future.
English
37