Ec Declaration Of Conformity - Schneider Airsystems SBS 700 SYS Manual De Instrucciones

GB
SBS 700 SYS
Assembly:
1. Hold the shaft (item 05) using the as-
sembly key (Fig. 2a).
2. Slacken the clamping nut (item 06) us-
ing the second assembly key (Fig. 2a).
3. Insert the relevant tool fitting (item 04)
(Fig. 3a).
4. Screw the clamping nut (item 06) loosely
onto the shaft (Fig. 4a).
5. Insert the abrasive / tool at least 15 mm
into the tool fitting (item 04) (Fig. 5a).
6. Hold the shaft (item 05) and tighten the
clamping nut (item 06) using the correct
assembly key (Fig. 5a).
I/ 4
1.7 EC Declaration of Con-
formity
Drill
SBS 700 SYS
Year of CE mark: 2008:
We declare under our sole responsibility that
this product complies with the following
guidelines and standards:
DIN EN ISO 12100;DIN EN 792;
BGR 500;
98/37/ EC (before 28.12.2009),
2006/42/ EC (after 29.12.2009).
pp Marco Lodni
Head of Development/Testing
08.2008
Schneider Druckluft GmbH
Ferdinand-Lassalle-Str. 43
72770 Reutlingen
Serial no.
G322649