Software Update; Getting Started; Switching The Sound Bar On; Establishing The Wi-Fi Connection - Silvercrest SMRB 40 A1 Manual De Instrucciones E Indicaciones De Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 181

Software update

As the product is constantly being developed, it can become necessary to update the software on
your device. This will be notified with a corresponding notice in the app.
Please perform the software update according to the app instructions.
Please note that the update may take up to 15 minutes, depending
on the Internet connection and the number of devices to be updated.
The update process:
The update starts loading. The blue and green LEDs light up for approx. 15 seconds, then the
blue LED goes out for a second and then the blue and green LEDs flash during the download
(approx. 10-30 seconds).
Then the blue LED comes on for approx. 10 to 15 seconds.
Next, the device restarts and the update is installed. This is indicated by the blue and green
LEDs flashing (approx. 1-2 minutes).
After the update is finished, the device restarts. After the reboot, it is available in the
SilverCrest Smart-Audio App again, the blue LED is now lit constantly.
Important! Please note the following:
Do not interrupt the power supply to the device while the update is running. Please wait for the
update to complete. The entire process is automatic, you don't need to do anything.
If you have any questions regarding the update process, please contact our hotline, who will be
happy to help you.

Getting started

Switching the sound bar on

Connect the sound bar to the supplied power adapter (B) and then connect the power adapter (B)
to an easily accessible power socket. Toggle the power switch (17) located on the back panel of
the unit to "ON". After a brief initialisation period (yellow and blue LEDs on simultaneously, then
one LED briefly lights up green) only the blue LED flashes slowly and the device is in AP mode.

Establishing the Wi-Fi connection

There are 2 ways to connect the sound bar (A) to the existing network of your router via Wi-Fi:
either by pressing the WPS / RESET button (14) or by downloading the SilverCrest Smart-Audio
app for free from the Apple
®
App Store or from the Google
SilverCrest SMRB 40 A1
®
Play Store. In both cases, when
English - 53

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Ian 279409

Tabla de contenido