Descargar Imprimir esta página

HP DesignJet Studio Serie Instrucciones De Montaje página 6

Ocultar thumbs Ver también para DesignJet Studio Serie:

Publicidad

10
Identify the front and back of the printer.
EN
FR
Identifiez l'avant et l'arrière de l'imprimante.
Ermitteln Sie die Vorder- und Rückseite des Druckers.
DE
IT
Identificare la parte anteriore e quella posteriore della
stampante.
ES
Identifique la parte delantera y trasera de la impresora.
PT
Identifique a parte frontal e a parte traseira da
impressora.
NL
Stel vast wat de voor- en achterkant van de printer is.
.‫حدد الجهة األمامية والخلفية من الطابعة‬
AR
11
Place the printer on the stand.
Placez l'imprimante sur le socle.
Setzen Sie den Drucker auf den Standfuß.
Posizionare la stampante sul supporto.
Coloque la impresora en el soporte.
Coloque a impressora no suporte.
Plaats de printer op het onderstel.
.‫ضع الطابعة على الحامل‬
12
From underneath, fix the printer to the stand with 4
screws.
De dessous, fixez l'imprimante au socle à l'aide de 4
vis.
Befestigen Sie den Drucker von unten mit 4 Schrauben
am Standfuß.
Partendo dal basso, fissare la stampante al supporto
con 4 viti.
Desde debajo, fije la impresora al soporte con 4
tornillos.
Por baixo, fixe a impressora no suporte com 4
parafusos.
Bevestig de printer van onderaf op het onderstel met
4 schroeven.
4 ‫ثب ِّ ت الطابعة بالحامل من جزئها السفلي باستخدام‬
.‫مسامير قالووظ‬
6

Publicidad

loading