Safety Features; Cleaning And Maintenance; Ce-Statement - EUROM CK2003T Manual De Instrucciones

Estufa convector eléctrico
Ocultar thumbs Ver también para CK2003T:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 39

Safety features

The heater is fitted with a tipping safeguard which automatically shuts off the appliance if it inadvertently falls over. The
heater will function as normal once it is returned to its upright position but you are advised to switch if off, unplug and check
it for damage before using again. Do not use the heater in case of damage or malfunctioning. Have the appliance
inspected/repaired!
In case of internal overheating, the overheating safeguard will switch the heater off. This may occur if the heater cannot
give off enough heat or if it cannot draw in enough fresh air. As mentioned above, this is generally caused by (partially)
covering the heater, obstructing the air intake and/or outlet grills or installing the heater too close to a wall or something
similar. In case of overheating, switch off the heater and unplug. Give the heater time to cool down, remove the source of the
overheating and use as normal. If the problem persists or if you have not been able to trace the source of the overheating,
turn the heater off immediately and unplug. Contact a servicing point to have the heater repaired.

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating so these should be
removed regularly. Switch off the heater, remove the plug from the socket and allow the heater to cool down before cleaning
or carrying out maintenance work.
Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive soaps, sprays,
cleaners or abrasives, waxes, polishes or chemical solutions!
Use a vacuum cleaner to carefully remove any dust and dirt from the grills and ensure that the air intake and outlet
openings are clean. Be careful not to touch or damage any internal parts during cleaning!
The heater contains no other parts which need maintenance.
At the end of the season, store the cleaned heater in the original packaging if possible. Store it upright in a cool, dry
and dust-free place.
Do not dispose of heater with household waste when it becomes worn or damaged beyond repair. Take it to your local
authority's collection point for electrical appliances where any reusable materials will be collected and redistributed.

CE-statement

Euromac bv, Genemuiden-NL hereby declares that the EUROM electrical convector heater, type CK2003T, complies
with the LVD guideline 2006/95/EG and the EMC guideline 2004/108/EC and meets the following standards:
EN 60335-1:2012
EN 60335-2-30:2009+A11 :2012
EN 62233:2008
Genemuiden, 14-01-2014
W.J. Bakker, alg.dir.
EN 55014-1 :2006/+A1 :2009
EN 55014-2 :1997/+A1 :2001/+A2 :2008
EN 61000-3-3 :2008
EN 61000-3-2 :2006/+A1 :2009/+A2 :2009
EN 61000-3-3 :1995/+A1:2001/+A2:2005
14

Publicidad

Tabla de contenido
loading

Productos relacionados para EUROM CK2003T

Tabla de contenido