IWC Schaffhausen INGENIEUR CHRONOGRAPH SILBERPFEIL Instrucciones De Manejo página 29

— 2 9 —
R E M O V I N G I N D I V I D U A L L I N K S
A N D A T T A C H I N G T H E B R A C E L E T
Repeat steps 1 to 3 at the distance from the first point of
separation you have just determined. Remove the unneces-
sary links and reassemble the shortened bracelet. Slide the
hinged link into the bracelet sideways (1).
Using the special tool provided, you can now push down the
fixing bolt (2) and, at the same time, slide the hinged link back
into the bracelet until it lies flush (3).
The fixing bolt must be aligned with the upper edge of the
securing link. It is important that you check that the hinged link
is sitting correctly.
Keep the surplus links and separating tool in a safe place for
use in any adjustment at another time.
I N G E N I E U R C H R O N O G R A P H