Temperature Indicator - Hama TH-140 Instrucciones De Uso

5.3Maximum and minimum value (MAX/MIN)
• The base station automatically stores the maximum and minimum indoor
temperature and humidity values.
• Repeatedly press the UP button (4) to switch between the current
temperature, maximum temperature (MAX) and minimum temperature (MIN).
• Press and hold the UP button (4) for approximately 2 seconds to reset the
stored maximum and minimum values.
5.4Hourly reminder alarm
• If you activate the hourly reminder alarm, a signal will sound every hour on
the hour.
• Press the MODE button (2) once to go to alarm mode (ALM).
• Press the UP button (4) twice to activate the hourly reminder alarm.
• If you press the UP button (4) a third time, both the alarm you have set (to go
off at a particular time) and the hourly reminder alarm will be activated. Press
the button a fourth time to deactivate both alarms.
appears on the display if the hourly reminder alarm is activated.
•
appears on the display if both the alarm you have set and the hourly
reminder alarm are activated.
Note – Weather symbols
• The product uses visual pictures to show the current weather conditions
(sunny/cloudy/rainy).
• The weather conditions are measured based on temperature and
humidity.
• No symbol is displayed if the humidity shows '- -'.

5.5Temperature indicator

• Press the SET button (3) in normal time mode to switch between °C and °F
for the temperature display.
• Temperature measurement starts automatically when the batteries are
inserted. In normal time mode, the display shows the current ambient
temperature, which is automatically updated every 20 seconds.
6. Care and Maintenance
• Only clean this product with a slightly damp, lint-free cloth and do not use
aggressive cleaning agents.
• Make sure that water does not get into the product.
Sunny
Cloudy
Rainy
Humidity
≤ 45%
≤ 56%
>56%
5