Markings And Signs To Be Affixed By Operating Company; Safety Instructions For Operating Staff - Kemper MiniFil Instrucciones De Montaje

EN

1.3 Markings and signs to be affixed by operating company

The operating company is obliged to post further notes and signs on the product and
its surrounding area if necessary.
Such markings and signs might be related, for example, to the requirement for
wearing personal protective equipment.

1.4 Safety instructions for operating staff

Before use, the operator of the product must be instructed through information,
instructions and training on the handling of the product and the materials and aids to
be used.
The product system may only be used in technically perfect condition, for its intended
purpose, in full awareness of the safety aspects and potential dangers and in
accordance with these instructions! All errors, especially those that may affect safety,
must be removed immediately!
Every person who is charged with commissioning, operation or maintenance must
have fully read and understood these operating instructions. Once they are working
on the machine, it is too late. This specifically applies to staff who only operate the
product occasionally.
The operating instructions must always be within reach of the product.
We accept no liability for any damages or injuries caused by failure to observe these
operating instructions.
The relevant accident prevention regulations and other generally recognized safety
and health rules and regulations are to be complied with.
It is important to clearly define and maintain responsibility for the different activities
in matters of servicing and maintenance. Only then will human error – especially in
dangerous situations – be avoided.
The operating company is to enforce wearing of personal protective equipment by
operating and maintenance staff. These include in particular safety shoes, safety
glasses and gloves.
Do not wear loose, long hair, loose clothing or jewellery! In theory, there is a risk of
getting caught on something, or even being pulled in or torn at moving parts!
If there are any safety-related changes to the product, immediately halt the process,
secure it and report the occurrence to the relevant authority/person!
Work on the product may only be carried out by reliable, trained staff. Observe the
minimum legal age!
Staff who require training, teaching or instructing or staff who undergo a general
apprenticeship may only operate the product under the supervision of an
experienced member of staff!
1502806-00 - 20 -