Descargar Imprimir esta página

Listo CHB7 L5 Instrucciones De Uso página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

• The most common cause of overheating
is dust deposit in the appliance's
ventilation grilles. Clean it regularly (see
maintenance section).
• To avoid any risk of burns, never touch
hot surfaces on the appliance.
• To move the appliance, set the switches
to position 0 and use the handle.
• Use the appliance on a horizontal surface.
Never use the appliance in an inclined or
lying position.
• Fully unwind the power cord before use.
• The appliance should never be used with
an extension cord.
• Never unplug the appliance from the
power socket by pulling on the power
cord.
• Always unplug the appliance when not
in use.
• The power cord must not come into
contact with the hot surfaces of the
appliance.
• Never slide the power cord under a
carpet or rug. Keep it away from high
traffic areas.
• Never twist, knot or wrap the power
cord around the appliance as this may
damage it.
• Never store the appliance while it is still
warm.
• Never leave your appliance unattended
during operation.
V.7.0
18
• Do not use this appliance outdoors or
on damp surfaces. Never allow liquid to
enter the appliance.
• To prevent electric shock, never immerse
the cable, plug or appliance in water or
any other liquid (bath, shower, swimming
pool).
• Never touch the appliance with wet
hands.
• Thermal safety: In the event of overheating,
a safety device automatically switches
off the appliance. In this case, unplug the
appliance from the power socket and plug
it back in once it has cooled down. If your
appliance still does not work, take it to your
retailer's customer service department to
be inspected and repaired. The user may
not perform any repairs.
• Tilting safety: The appliance is equipped
with a safety cut-out system, which
automatically switches off the appliance
if it is tilted.
• Please refer to the end of this manual
for further information on cleaning and
maintaining this appliance.
19
V.7.0

Publicidad

loading