Sony WRT-807B Manual De Instrucciones página 11

D CH (channel) indication
Displays the transmitting channel.
Each time you press the SET button in Transmit mode, the
channel indication changes as follows.
Transmitting
channel
Transmitting
frequency
Attenuation level
Accumulated
battery use time
Press SET button.
Transmitting channel: The current transmitting channel
setting.
Transmitting frequency: The current transmitting
frequency setting.
Attenuation: The input attenuation setting in decibels.
Can be set within a range of 0 dB to 21 dB in 3-dB
steps.
Accumulated battery use time: The accumulated time of
battery use (in 1-minute increments).
To adjust these parameters, see "Changing the transmitting
Channel" on page 8, "Changing the Input Attenuation
Setting" on page 10 or "Resetting the Accumulated Battery
Use Time Indication" on page 11.
3 SET button
In Transmit mode, press this button to change the indicated
items in the lower half of the liquid-crystal display.
To change to Setting mode, turn the POWER switch to ON
while holding this button down. Then press this button to
select the items to be indicated.
How to press the SET and +/– buttons
Display example
for CE62 model
For details on Setting mode, see "Settings" on page 8.
+ –
SET
Press the button with a
ballpoint pen or similar item.
5
(GB)