brennenstuhl RCS 1044 N Comfort Manual De Instrucciones página 16

079515 BA_Funkschaltset RCS 1044 N.qxp 21.10.16 11:00 Seite 16
Control key
A
B
C
D
2. Swivel the cover (12) inward and close it.
3. Insert the screw (15) through the screw opening (11) and
into the threading (14) and screw it tight.
Example
Set the system code to 123 on the remote control.
Set the system code to 123 on the switch outlet. Also set an
operating button. In the figure, the button pair A is set with
DIP switch A.
Connecting the device
The range of the wireless signal of the remote control is max.
25 m and depends on the structural conditions.
The range an be interrupted by structural (for instance
reinforced concrete), electrical (for instance electrical
lines) or electromagnetic (for instance telephones) conditi-
ons. If necessary, remove the source of the interference or
maintain an appropriate distance from the source of the
interference.
16
DIP switch
A B
ON OFF
OFF ON
OFF OFF
OFF OFF
RCS 1044 N Comfort
C D
OFF OFF
OFF OFF
ON OFF
OFF ON
E
OFF
OFF
OFF
OFF