Descargar Imprimir esta página

Troubleshooting; Disposal - AEG USR 5516 Manual De Instrucciones

Máquina de limpieza por ultrasonido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 25
Clatronic-GB.book Seite 14 Donnerstag, 14. August 2008 10:23 10

Troubleshooting

Troubleshooting
Please use the following table to check whether you
can correct the fault yourself.
WARNING:
Be sure to pull the power plug before you start
troubleshooting. Never use a defective device.
Error
Possible
cause
The device
no electrical
does not
power supply
power up
when pressing
the ON/OFF
switch.
The cleaning
heavy dirt
effect is
build-up
insufficient.
simultaneous
cleaning of
several
objects

Disposal

At the end of the service life of the machine, in
particular if it is malfunctioning, make the machine
unusable by pulling the mains plug out of the socket
and separating the power cable. Dispose of the device
in accordance with the environmental regulations of
your country. Electrical waste products may not be
disposed of together with household waste. Contact
your municipality or your dealer for advice regarding
recycling.
Meaning of the symbol "recycle bin"
Protect the environment by not disposing
of electrical devices in regular household
waste. Take all electrical devices that you
will no longer use and want to dispose of
to the designated waste collecting points.
By doing so, you are helping to avert
potentially negative effects to the
environment and the health of human
beings caused by improper disposal. You also
contribute to the reuse and recycling of old electrical
and electronic devices. For information on where to
dispose of the devices, please contact your local
community or municipal administration.
14
Solution
Plug in the plug properly; you
may want to check if the outlet
is functional by using another
device.
Add a common cleaning
solution to the water tank
Page 12, "Cleaning
objects". Replace the water in
the water tank.
Reduce the number of
objects in the tank.

Publicidad

loading